3 minute cleaning mode

  1. The machine should be put on cleaning mode at least once a week.
  2. Ensure the brewing chamber is empty.
  3. Fill the water tank and ensure you use a vessel under the dispenser which is large enough to hold a full tank of water.
  4. To start, ensure the machine is out of stand by mode.
  5. Hold down both buttons at the same time for 6 seconds until the left button glows blue. Then release.
  6. The machine will then automatically start a 3 min cycle.
  7. Once this is completed, empty the water from the vessel and refill your water tank.